从STM32G4系列的STM32CubeG4开始的用户手册_ENV2_20201118.pdf
STM32G4xx系列固件库驱动库软件开发包使用说明英文。
2021-03-28 13:02:37
645KB
1
STM32CubeG4_V1.1.0_20190717.zip
STM32G4xx系列官方固件库驱动库软件开发包源代码，直接加入开发环境调用链接编译即可。
2021-03-28 13:02:36
192.66MB
1
STM32CubeG4_V1.2.0_20200226.zip
STM32G4xx系列官方固件库驱动库软件开发包源代码，直接加入开发环境调用链接编译即可。
2021-03-28 13:02:35
209.91MB
1
Version: 1.1.0 (2019-05-28) Keil.STM32G4xx_DFP.1.1.0.pack
Initial public release of STM32G4 Series Device Support:
Requires STM32CubeMX Version 5.2 or higher and STM32CubeG4 Firmware Package V1.0.0
Added debug sequences:
configure ETM Trace.
Added board support for STM32G474E-EVAL:
Added Blinky example.
2021-03-21 16:05:13
72.93MB
1
Version: 1.2.0 (2020-08-03) Keil.STM32G4xx_DFP.1.2.0.pack
Added devices:
STM32G491xxxx, STM32G4A1xxxx and STM32G483xx series.
STM32G474Px/STM32G484Px/STM32G473Px/STM32G483Px BGA121 variants.
STM32G431MBTx, STM32G441MBTx variants.
Updated STM32CubeG4 Firmware Package to V1.3.0.
Updated svd files
Fixed flash programming algorithm issue for the STM32G4xxxC devices to support both Dual/Single Bank configuration in STM32G4xx_256.FLM.
Updated the Flash category 3 (512kB) with one FLM that supports the D/S Bank config.
FrameworkCubeMX_gpdsc.ftl:
Added support for Timebase Source TIMx
Updated example:
Terminating app_main thread with osThreadExit() to avoid endless loop
2021-03-21 16:05:12
89.49MB
1
基于CUBE MAX的STM32G474开发程序包，里面包括LED、定时器中断、按键、PWM、0.96寸OLED、ADC+DMA、OLED可移植驱动包。全是自己写的，保证好用，需要的可以下载。
2021-03-21 15:08:28
139.44MB
1