STM32F103驱动TM1637源码对应IO为PA15和PB4可直接修改使用
STM32F103驱动TM1637源码对应IO为PA15和PB4可直接修改使用
2021-04-23 15:40:34
276KB
1
软件介绍:
直接用从官方获取到的STM32F1xx_DFP.2.1.0，使用前不需要解压缩，直接使用pack installer 导入即可。会自动进行解压处理。程序安装完毕后，KEIL自动更新库后即可使用。
2021-04-22 12:52:52
47.21MB
1
STM32F1xx_DFP安装包，解压之后直接安装就可以。目前为最新的STM32F1的安装包。可以支持所有的STM32F1的单片机。
2021-04-20 17:00:23
46.65MB
1
在Keil MDK 5里面直接创建使用HAL库的STM32工程,不使用STM32CubeMX，适用于STM32F1XX系列，需要自行添加mcu头文件。已经将STM32F107放进去了
2021-04-15 21:46:32
789KB
1
Version: 2.3.0 (2018-11-05) Keil.STM32F1xx_DFP.2.3.0.pack Download
Added DBGMCU INI files for setting up debug configuration.
Fixed case insensitive include of device header file (fixing build error on Linux).
Updated CMSIS driver:
CAN:
Corrected MessageSend function to only access required data for sending
Corrected abort message send functionality
Corrected SetBitrate function
EMAC:
Corrected ETH DMA initialization. Now done when MAC transmitter or receiver is enabled (resolving netInitialize/netUnnitialize/netInitialize issue).
USB Host and Device :
Added support for CMSIS-RTOS2
USART:
Corrected ARM_USART_SET_IRDA_PULSE control
Updated Board drivers:
Updated Board Support LED_*.c files.
Updated Examples:
Updated emWin examples to emWin V5.46e.
Updated USB Host examples thread stack settings
2021-04-06 21:53:22
46.65MB
1